 |
 |
 |
|
New Amplified Bluetooth RCA Drive-In Movie Speaker Set + Red Metal Pole & Base
We’re excited to announce our Bluetooth amplified lighted Smart Device RCA Drive-In Movie Speaker Set with Red Metal Pole and Base. After extensive testing with various amps, we finally found the ideal amp that fits our junction box nicely. The amplifier delivers stereo sound, rated at 8 watts per channel, and is over surge protected. Our amplified stereo speaker combination produces a good mix of high/low, and mid-range sound. Included is a built-in on/off power switch that operates the amplifier and LED lights. The LED light bulbs illuminates the red Glo-top lens and top of the speaker pole. We’re also supplying a 3-foot 5.5MM extension power supply cable that attaches to the amp and down the pole to power supply. This amplifier requires 12 volts to power up. We’re supplying a 3-foot 110 volt wall jack converter. Keep in mind, our set-up could operate on any 12 volt applications, such as your car cigarette lighter. Perfect addition for your classic car shows, recreational room, around the pool, or even man cave.
Bluetooth 4.0 Amplifier Specifications:
- Voltage: DC 12 Volt
- Dimensions: 4.8cm x 8cm
- Channel Type: Dual Channel
- Recommended Speaker : 20-80W
- Input impedance: 85K-100K
- Output Impedance: 4Ω
- Output Power: 8W +8W (4Ω speaker)
Speakers/Junction Box/Pole and Base Details:
- (2) RCA speakers with Junction box
These speakers are still manufactured by us Detroit Diecast using the original casting molds from the 1950's.
The casting are made of aluminum.
The internal components are all new.
This includes 4 inch, 4 ohm waterproof speakers, continuous rotation volume controls, new Detroit Diecast 6 foot straight cords.
The Junction box (J-Box) is also new which includes a red polycarbonate Glo-top. The Glo-top is translucent to allow light illumination.
Red Powder Coated Drive-In Movie Speaker Metal Pole And Base.
Our heavy duty round base were designed to support our unique 2 inch metal pole for Drive-In Speakers.
Total weight of the base is just under 8 pounds. Professionally painted red powder coat.
The base top plate measures 11 inches in diameter. 2-1/2 inches high from top to bottom. Easy to assemble, top plate is made of metal, seated on a weighted plastic coated base.
Includes Red Powder Coated Detroit Diecast Drive-In Movie Speaker 2 Inch Outer Diameter Metal/Steel Junction Box Base Support Pole.
This heavy duty Steel 3-foot pole was designed to support our unique Drive-In Speaker base holder. One end attaches to the base, the other to Drive-In Speaker Junction box.
Retaining plate incorporated in bottom of pole to support pole to base.
Retaining bolt and washer included.
Access port in bottom of pole to allow power source wires up into the pole to Junction box.
We added a black grommet to protect your power source wiring.
Total weight of the pole is just under 5 pounds.
The speakers have been tested to ensure functionality. Get ready to Rock and Roll with your new set of vintage Drive-In Speakers!
Our Bluetooth Drive-In speakers can be used with Smart TV's that are Bluetooth enabled!
Check out the short video on our Facebook page.
|
|
|
 |
|
 |
|